Question 20N.2.HL.TZ0.9
| Date | November 2020 | Marks available | [Maximum mark: 8] | Reference code | 20N.2.HL.TZ0.9 |
| Level | HL | Paper | 2 | Time zone | TZ0 |
| Command term | Calculate, Draw, Estimate, Explain | Question number | 9 | Adapted from | N/A |
The diagram shows an alternating current generator with a rectangular coil rotating at a constant frequency in a uniform magnetic field.
Explain, by reference to Faraday’s law of induction, how an electromotive force (emf) is induced in the coil.
[3]
there is a magnetic flux «linkage» in the coil / coil cuts magnetic field ✓
this flux «linkage» changes as the angle varies/coil rotates ✓
«Faraday’s law» connects induced emf with rate of change of flux «linkage» with time ✓
Do not award MP2 or 3 for answers that don’t discuss flux.
This question was well answered with the majority discussing changes in flux rather than wires cutting field lines, which was good to see.
The graph shows how the generator output voltage varies with time .
Electrical power produced by the generator is delivered to a consumer some distance away.
The average power output of the generator is . Calculate the root mean square (rms) value of the generator output current.
[2]
✓
✓
Generally well answered.
The voltage output from the generator is stepped up before transmission to the consumer. Estimate the factor by which voltage has to be stepped up in order to reduce power loss in the transmission line by a factor of .
[1]
«power loss proportional to hence the step-up factor is ✓
This was well answered by many, but some candidates left the answer as a surd. The most common guess here involved the use of root 2.
The frequency of the generator is doubled with no other changes being made. Draw, on the axes, the variation with time of the voltage output of the generator.
[2]
peak emf doubles ✓
halves ✓
Must show at least 1 cycle.
Well answered, with the majority of candidates scoring at least 1 mark.